230V 1P 2.5KW 280x280x45mm Leak-proof Design PTFE Immersion Semiconductor Heater
Voltage: 208V 1Phase
Power: 3KW
Dimension: 350*250*40MM, can do as your requirements
Material: PTFE+PFA heating wire
Usage: Put on the bottom of the chemical tank to heating up the tank solutions.
Industries
Semiconductor
Ultra-High-Purity Solutions
Surplus designs and manufactures thermal solutions and power supplies to meet the most stringent cleanroom,
ultra-high-purity (UHP) processes, and customer requirements of the Semiconductor and Wafer Processing industries.
Applications
Wet-Deposition
Flammable Solvent Heating
Chemical Heating
RO/DI Water Heating
Ultra-High-Purity Heating
PRODUCT OVERVIEW
Heaters For Semiconductor are great for heating fluid baths to a constant temperature. These heaters are ideal for use in the semiconductor, pharmaceutical, and biomedical industries. First of all, these immersion heaters provide clean heat evenly and efficiently. Furthermore, they’re compact and highly customizable. They provide a maximum process work area, and consume a minimal amount of chemicals. Moreover, wetted surfaces feature all-PFA materials, and may be used in tanks made of PVDF, PFA, or quartz. Please contact us with inquiries about other tank materials.
BOTH AGGRESSIVE CHEMISTRIES AND DEIONIZED WATER
These rugged and durable heaters come in grid, frame, and fence models, with outputs of 1.0 to 30.0 kW. Most importantly, they feature a low watt density (≤ 4 watts/in²) for a fast heating response. Furthermore, these heaters integrate easily into most process tanks. Provide Surplus with your specifications and tank size, and let us build an immersion heater for you.
SAFETY FEATURES
At the heart of these immersion heaters is the patented PreciseHeater heating coil, with a efficiency of > 99% and a MTBF of more than 10 years. Moreover, a microprocessor-based temperature controller regulates the heater output. Additionally, optional safety features include both platinum and embedded ground wires, a Type-J process thermocouple, and RTD over-temperature and process thermocouples.
KEY SPECIFICATIONS
Maximum heating temperature of these immersion heaters is 200º C (392º F), with a temperature accuracy of ± 0.1º C (contingent on customer’s facilitation). Grid heaters are typically ¾” high, and frame heaters 1 ½” high. Outputs range from 1.0 to 30.0 kW (dependent on customer voltage), and from 120 VAC to 480 VAC, 1 or 3-ph (dependent on wattage).
| Heater Element | Heating Coil |
| Wetted Surfaces | PFA/PTFE |
| Wattages | 1.0 – 20 kW |
| Voltages | 120 – 480 VAC
1 or 3 phase |
| Sizes (LxW) | 7x5 to 19x14 inch |
| Height | 1-5/8 inch |
| Temperature | 200°C (392°F) |
| Hi-Limit Sensor | Type-J thermocouple |
| Ground Wire | Encapsulated |
| Lead Wire | 15-ft |
Other Applications(Other products)
Precious Metal Deposition
Engineered to meet the most stringent requirements, accurate and reliable Heaters in Precious Metals' Deposition reduce materials waste. Low ripple Power Supplies provide clean and smooth direct current (DC), precision results while also saving on materials.
Products For General Metal Finishing |
| MOTS SINGLE
MOTS Single Heater – Chemical and Small Immersion Heater: Metal over the side single heater. Single or three phase. 1000-12000 watts, 120-600 volts. 
| MOTS SINGLE – DAS, PHOSPHATE
MOTS Single DAS Phosphate Heater – Top Portable Electric Immersion Heaters: Phosphate, metal over the side heater. Single or three phase. 1000-10000 watts, 120-600 volts. 
| MOTS TRIPLE – L SHAPED, DERATED
Derated, low watt density, L-shaped, bottom style metal over the side heater. 1500-18000 watts, 120-480 volts. 
|
| MOTS SINGLE – BOTTOM, DERATED
Derated, low watt density, L-shaped, bottom, metal over the side Immersion Heater. Single or Three phase. Three phase. 500-6000 watts, 120-480 volts. . | MOTS TRIPLE – L SHAPED
L-shaped, bottom style metal over the side heater. Three phase. Single or three phase. 3000-36000 watts, 200-600 volts. 
| 6HS SERIES – TUBULAR
Over the side, 6 element, tubular heater. Three phase. 6000-21000 watts, 208-600 volts. 
|
9HX SERIES
Low watt density, 9 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 3000-18000 watts, 208-600 volts.
 | 6HX SERIES
Low watt density, 6 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 2000-12000 watts, 208-600 volts.
 | 3HXOL SERIES Low watt density, 3 element, bottom heater. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions . 3000-18000 watts, 208-480 volts. 
|
Product Tags:
|
|
230V 1P 2.5KW PTFE Immersion Semiconductor Heater 280x280x45mm Leak Proof Design Images
|
